|UNH-IOL CE Router March 2011 Whitepaper||UNH-IOL||
The University of New Hampshire InterOperability Laboratory (UNH-IOL) recently hosted an interoperability test event focusing on Customer Edge (CE) router IPv6 device capability. The testing documented during this event took place during the week of February 14th through 18th 2011.
|March 17, 2011||White Papers|
|MIPI InterOperability and Comformance Testing||David Woolf||
Introduction to the Model Industry Processor Interface technology and two ways of testing products associated with the MIPI technology.
|June 16, 2010||Tutorials|
|TR-069 - A Crash Course||Jason Walls, Tim Sheehan||
A detailed overview of the CPE WAN Management Protocol as specified in Broadband Forum Technical Report 069 and related documents
|December 21, 2009||Tutorials|
|Implementing DHCPv6 on an IPv6 Network||Benjamin Long||
Information about implementing a DHCPv6 system in an existing IPv6 netowrk.
|August 11, 2009||Tutorials|
|Fibre Channel Physical Layer Tutorial||Daniel Reynolds||
FC-PI-2 specifies both Electrical and Optical interfaces for Fibre Channel. This document focuses on the Electrical Physical Layer up to 4G speeds. This document describes the unique characteristics specific for FC devices as well attempts to introduce the generic topics involved in serial based technologies.
|June 22, 2009||Tutorials|
|A Comparison of Efficiency, Throughput, and Energy Requirements of Wireless||Anthony Murabito||
As energy sources are dwindling, power consumption is a major obstacle facing virtually every industry. Alongside Internet access, wireless computer networks, more commonly known as Wi-Fi networks, have become widely adopted. These wireless networks have found their way into our homes and have also spread to the enterprise market. The goal of this research is to study the power consumption of wireless Access Points, and determine possible means to reduce the energy requirement of the Access Point.
|March 1, 2009||White Papers|
|Data Center Bridging Tutorial||Mikkel Hagen||
Describes the upcoming IEEE standards related to Per-priority PAUSE, Enhanced Transmission Selection, DCB Exchange and Congestion Notification.
|February 1, 2009||Tutorials|
|Fibre Channel over Ethernet Tutorial||Mikkel Hagen||
Fibre Channel over Ethernet is a data center protocol designed to transfer Fibre Channel frames over commodity Ethernet equipment.
|November 25, 2008||Tutorials|
|Routing OSPFv2 Guide||UNH-IOL||
This document describes the OSPF Protocol.
|July 21, 2008||Tutorials|
|Moonv6 June 2007 Whitepaper||UNH-IOL||
The testing documented in this paper took place in June 2007 and focused on end-to-end basic office application demonstrations including printing scenarios, NFS (Network File Share), web design tools, collaboration tools, and SHIM6(Site Multihoming By IPv6) in a multivendor environment.
|September 13, 2007||White Papers|