10BASE-T Testing Test Plans

The test plans on this page may be downloaded and used for internal purposes only. The test plans may not be commercialized in any way without express permission of the UNH-IOL.

The 10BASE-T Testing testing service currently offers the following test plans. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the 10BASE-T Testing testing service.

When testing based on the following test plans is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using our document validation instructions.

IOL

Conformance

Status
Fully Documented (Active)
Revision
5.3
Testing Days Needed
3 days
Last Modified
2015-06-04
Abstract
This test suite deals with Reception issues such as CRC Errors, Framing Errors, Length Errors, Fragments, etc. as well as Transmission issues, proper spacing, proper preamble and SFD, For Half Duplex devices this also includes collisions, deference, etc. This suite of tests has been developed to help implementers evaluate the functioning of their Clause 4 Media Access Control (MAC) based products. The tests do not determine if a product conforms to the IEEE 802.3, nor are they purely interoperability tests. Rather, they provide one method to isolate problems within a MAC device. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function well in most environments.
Notes
Previous versions of this test suite include: v4.1 v4.2 v4.3 v4.4 v4.5 v4.6, v5.0, v5.1, v5.2
1000BASE-X MAC Test Suites: v1.0, v2003_05_20.
Status
Fully Documented (Active)
Revision
5.4
Testing Days Needed
3 days
Last Modified
2008-08-04
Abstract
This test suite deals with 10 Mb/s Physical Layer testing, amplitude, timing, template fit, etc. This suite of tests has been developed to help implementers evaluate the functioning of their Clause 14 Medium Attachment Unit, Type 10BASE-T based products.
Notes
Previous versions of this test suite include: v5.3, v5.2, v5.1, v5.0 and v4.1.
Status
Fully Documented (Active)
Revision
1.1
Testing Days Needed
3 days
Last Modified
2012-01-26
Abstract
This test suite deals with 10BASE-Te Physical Layer testing, amplitude, timing, template fit, etc. This suite of tests has been developed to help implementers evaluate the functioning of their Clause 14 Medium Attachment Unit, Type 10BASE-Te based products.
Notes
Previous versions of this test suite include: v1.0

Key

Fully Documented
Draft