100BASE-T1 Single Pair Ethernet Test Plans

The test plans on this page may be downloaded and used for internal purposes only. The test plans may not be commercialized in any way without express permission of the UNH-IOL.

The 100BASE-T1 Single Pair Ethernet testing service currently offers the following test plans. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the 100BASE-T1 Single Pair Ethernet testing service.

When testing based on the following test plans is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using our document validation instructions.

IOL

Conformance

Status
Draft (Active)
Revision
1.0
Testing Days Needed
3 days
Last Modified
2016-03-10
Abstract
These tests are designed to determine if a product conforms to specifications defined in IEEE 802.3 Physical Layer Transceiver Specification For Automotive Applications Standard. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the UNH-IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function properly in many 100BASE-T1 automotive environments.
Status
Draft (Active)
Revision
1.0
Testing Days Needed
3 days
Last Modified
2016-03-10
Abstract
This suite of tests has been developed to help implementers evaluate the functionality of their Clause 96 Physical Coding Sublayer (PCS) based products. The tests do not determine if a product conforms to IEEE 802.3 standard, nor are they purely interoperability tests. Rather, they provide one method to isolate problems within a PCS device. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the device under test (DUT) will function well in most environments.
Status
Draft (Active)
Revision
1.0
Testing Days Needed
3 days
Last Modified
2016-03-10
Abstract
These tests are designed to determine if a product conforms to specifications defined in the IEEE 802.3 standard. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other devices. However, combined with satisfactory operation in the IOL's interoperability test bed, these tests provide a reasonable level of confidence that the Device Under Test (DUT) will function properly in many 100BASE-T1 environments.
Status
Fully Documented (Active)
Revision
Testing Days Needed
Last Modified
2023-08-07
Status
Fully Documented (Active)
Revision
Testing Days Needed
Last Modified
2023-08-07
Status
Draft (Active)
Revision
0.1
Testing Days Needed
Last Modified
2019-01-25
Abstract
Current document available to Open Alliance members at this link: OPEN Alliance TC10 Sleep/Wake-up for 100BASE-T1

Key

Fully Documented
Draft