NVMe Test Plans
The test plans on this page may be downloaded and used for internal purposes only. The test plans may not be commercialized in any way without express permission of the UNH-IOL.
The NVMe testing service currently offers the following test plans. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the NVMe testing service.
When testing based on the following test plans is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using our document validation instructions.
IOL
Conformance
- Status
- Fully Documented (Active)
- Revision
- 10.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-08-30
- Abstract
- This suite documents conformance test requirements for listing products to version 10.0 of the NVMe Integrators List as well as the NVMe over Fabrics Integrators List. These requirements will go into effect at NVMe Plugfest #10, in November 2018. Conformance testing for NVMeoF targets is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service. Conformance testing for PCIe based NVMe SSDs is only available through UNH-IOL NVMe Testing Service.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents conformance test requirements for listing products to version 11.0 of the NVMe Integrators List as well as the NVMe over Fabrics Integrators List. These requirements will go into effect at NVMe Plugfest #11, in June 2019. Conformance testing for NVMeoF NVM Subsystems is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service. Conformance testing for PCIe based NVMe SSDs is only available through UNH-IOL NVMe Testing Service.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents conformance test requirements for listing products to version 11.0 of the NVMe Integrators List as well as the NVMe over Fabrics Integrators List. These requirements will go into effect at NVMe Plugfest #11, in June 2019. Conformance testing for NVMeoF NVM Subsystems is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service. Conformance testing for PCIe based NVMe SSDs is only available through UNH-IOL NVMe Testing Service. This is a redline version of the document.
- Status
- Fully Documented (Active)
- Revision
- 10.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-08-30
- Abstract
- This suite documents conformance test requirements for listing products to version 10.0 of the NVMe-MI Integrators. These requirements will go into effect at NVMe Plugfest #10, in November 2018.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents conformance test requirements for listing products to version 11.0 of the NVMe-MI Integrators List. These requirements will go into effect at NVMe Plugfest #11, in June 2019.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents conformance test requirements for listing products to version 11.0 of the NVMe-MI Integrators List. These requirements will go into effect at NVMe Plugfest #11, in June 2019. This is a redline version of the document.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents conformance test requirements for listing products to version 11.0 of the NVMe over Fabrics Integrators List. This test suite is intended to be transport agnostic, and therefore these requirements apply to all NVMe-oF products regardless of transport type (RoCE, FC, TCP etc...). These requirements will go into effect at NVMe Plugfest #11, in June 2019. This service is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service.
- Status
- Fully Documented (Active)
- Revision
- 9.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-05-07
- Abstract
- This suite documents conformance test requirements for listing products to version 9.0 of the NVMe Integrators List as well as the NVMe over Fabrics Integrators List. These requirements will go into effect at NVMe Plugfest #9, in June 2018.
Conformance testing for NVMeoF targets is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service. Conformance testing for PCIe based NVMe SSDs is only available through UNH-IOL NVMe Testing Service.
- Status
- Fully Documented (Active)
- Revision
- 9.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-05-07
- Abstract
- This suite documents conformance test requirements for listing products to version 9.0 of the NVMe-MI Integrators. These requirements will go into effect at NVMe Plugfest #9, in June 2018.
Interoperability
- Status
- Fully Documented (Active)
- Revision
- 10.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-08-30
- Abstract
- This suite documents interop test requirements for listing products to version 10.0 of the NVMe Integrators List. These requirements will go into effect at NVMe Plugfest #10, in November 2018.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents interop test requirements for listing products to version 11.0 of the NVMe Integrators List. These requirements will go into effect at NVMe Plugfest #11, in June 2019.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents interop test requirements for listing products to version 11.0 of the NVMe over Fabrics Integrators List. This test suite is intended to be transport agnostic, and therefore these requirements apply to all NVMe-oF products regardless of transport type (RoCE, FC, TCP etc...). These requirements will go into effect at NVMe Plugfest #11, in June 2019. This service is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents interop test requirements for listing products to version 11.0 of the NVMe Integrators List. These requirements will go into effect at NVMe Plugfest #11, in June 2019. This is a redline version of the document.
- Status
- Fully Documented (Active)
- Revision
- 10.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-08-30
- Abstract
- This suite documents interop test requirements for listing products to version 10.0 of the NVMe over Fabrics Integrators List. These requirements will go into effect at NVMe Plugfest #10, in November 2018. This service is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service.
- Status
- Fully Documented (Active, see notes)
- Revision
- 11.0
- Testing Days Needed
- 1 week
- Last Modified
- 2019-02-07
- Abstract
- This suite documents interop test requirements for listing products to version 11.0 of the NVMe over Fabrics Integrators List. This test suite is intended to be transport agnostic, and therefore these requirements apply to all NVMe-oF products regardless of transport type (RoCE, FC, TCP etc...). These requirements will go into effect at NVMe Plugfest #11, in June 2019. This service is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service. This is a redline version of the document.
- Status
- Fully Documented (Active)
- Revision
- 9.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-05-07
- Abstract
- This suite documents interop test requirements for listing products to version 9.0 of the NVMe Integrators List. These requirements will go into effect at NVMe Plugfest #9, in June 2018.
- Status
- Fully Documented (Active)
- Revision
- 9.0
- Testing Days Needed
- 1 week
- Last Modified
- 2018-05-07
- Abstract
- This suite documents interop test requirements for listing products to version 9.0 of the NVMe over Fabrics Integrators List. These requirements will go into effect at NVMe Plugfest #9, in June 2018.
This service is currently only available through UNH-IOL Ethernet Switching Protocols Testing Service or the UNH-IOL Fibre Channel Testing Service.
Key
| Fully Documented |
| Draft |