DSL Test Plans

The test plans on this page may be downloaded and used for internal purposes only. The test plans may not be commercialized in any way without express permission of the UNH-IOL.

The DSL testing service currently offers the following test plans. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the DSL testing service.

When testing based on the following test plans is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using our document validation instructions.

Broadband Forum

Conformance

Status
Fully Documented (Partially Implemented)
Revision
2.0
Testing Days Needed
10 days
Last Modified
2010-01-04
Abstract
This test plan facilitates VDSL2 over POTS and ISDN functional testing. This test plan embodies operators' definitions of VDSL2 interoperability (between one DSLAM and one CPE at a time). The test plan focuses on physical layer testing, and also validation and verification of selected higher layer functionality. It does not replace operators' pre-deployment testing.
Notes
Implemented tests from this test suite
Status
Fully Documented (Active)
Revision
Issue 1
Testing Days Needed
10 days
Last Modified
2010-04-01
Abstract
This test plan facilitates ADSL2/2plus over POTS and ISDN functional testing. This test plan embodies operators' definitions of ADSL2/2plus interoperability (between one DSLAM and one CPE at a time). The test plan focuses on physical layer testing, and also validation and verification of selected higher layer functionality. It does not replace operators' pre-deployment testing.

Interoperability

Status
Fully Documented (Partially Implemented)
Revision
1.0
Testing Days Needed
1 day
Last Modified
2005-03-16
Abstract
TR-067 is the ADSL Interoperability Test Plan designed by the Broadband Forum. The DSL Consortium can perform sections of this test and generate reports based on this Technical Report.
Notes
A.2.1 A.2.3.1 A.2.3.2 A.2.4.1 Fixed 832/192 A.2.4.1 Fixed 1504/320 A.2.4.1 Fixed 4832/640
Status
Fully Documented (Partially Implemented)
Revision
1.0
Testing Days Needed
1 day
Last Modified
2005-03-16
Abstract
TR-067 is the ADSL Interoperability Test Plan designed by the Broadband Forum. The DSL Consortium can perform sections of this test and generate reports based on this Technical Report.
Status
Fully Documented (Partially Implemented)
Revision
1.0
Testing Days Needed
1 day
Last Modified
2005-03-16
Abstract
TR-067 is the ADSL Interoperability Test Plan designed by the Broadband Forum. The DSL Consortium can perform sections of this test and generate reports based on this Technical Report.
Status
Fully Documented (Partially Implemented)
Revision
2.0
Testing Days Needed
1 day
Last Modified
2007-03-30
Abstract
TR-100 is the ADSL Interoperability Test Plan designed by the Broadband Forum updated to specifically test ADSL2 and ADSL2+. The DSL Consortium can perform sections of this test and generate reports based on this Technical Report.
Notes
A.2.2.1 A.2.2.2 A.2.2.5 A.2.2.6 Class A A.2.2.6 Class B A.2.3.1 A.2.3.2 A.2.3.3 A.2.3.4 A.2.5.1 A.2.5.2 A.2.5.3 A.2.5.4 A.2.6.1 A.2.6.2 A.2.7.1 A.2.7.2
Status
Fully Documented (Partially Implemented)
Revision
2.0
Testing Days Needed
1 day
Last Modified
2007-03-30
Abstract
TR-100 is the ADSL Interoperability Test Plan designed by the Broadband Forum updated to specifically test ADSL2 and ADSL2+. The DSL Consortium can perform sections of this test and generate reports based on this Technical Report.
Status
Fully Documented (Partially Implemented)
Revision
2.0
Testing Days Needed
1 day
Last Modified
2007-03-30
Abstract
TR-100 is the ADSL Interoperability Test Plan designed by the Broadband Forum updated to specifically test ADSL2 and ADSL2+. The DSL Consortium can perform sections of this test and generate reports based on this Technical Report.
Status
Fully Documented (Active, see notes)
Revision
2.0
Testing Days Needed
1 day
Last Modified
2012-11-29
Abstract
TR-100 is the ADSL Interoperability Test Plan designed by the Broadband Forum updated to specifically test ADSL2 and ADSL2+. The DSL Consortium can perform sections of this test and generate reports based on this Technical Report.
Notes
Use this test selection to request testing of TR-100 Issue 2 Annex J, Sections J.5.1 through J.5.2.
Status
Fully Documented (Active)
Revision
2.0
Testing Days Needed
1 days
Last Modified
2012-11-01
Abstract
Interoperability performance test cases for VDSL2 DSLAM and CPE products operating in Annex A mode.
Status
Fully Documented (Active)
Revision
2.0
Testing Days Needed
1 days
Last Modified
2012-11-01
Abstract
Interoperability performance test cases for VDSL2 DSLAM and CPE products operating in Annex B mode.
Status
Fully Documented (Active)
Revision
Issue 1
Testing Days Needed
10 days
Last Modified
2014-09-19
Abstract
This Technical Report is intended to provide an interoperability test plan for ITU-T Recommendation G.993.5 titled "Self-FEXT cancellation (vectoring) for use with VDSL2 transceivers." Deployment scenarios in the scope of this technical report include deployments from the Central Office (CO) and Fiber-to-the-x (FTTx) remote deployments. The scope of this Technical Report also covers validation of the functionality of the Control, Inventory, and Reported parameters defined in G.997.1 for the G.993.5. Testing includes requirements and updates according to TR-249 Amendment 1.
Status
Fully Documented (Active)
Revision
1.0
Testing Days Needed
5 days
Last Modified
2012-06-25
Abstract
TR-273 provides testing methodology of multiport xDSL systems which use pair bonding protocols, such as ITU G.998.1 (ATM), G.998.2 (Ethernet), and G.998.3 (TDM),. The bonded lines may include DSLs specified by ITU-T Recommendations G.992.1 (ADSL), G.992.3 (ADSL2), G.992.5 (ADSL2plus), G.993.2 (VDSL2), and G.991.2 (SHDSL).

Performance

Status
Fully Documented (Active)
Revision
1.0
Testing Days Needed
1 days
Last Modified
2020-01-31
Abstract
Interoperability performance test cases for VDSL2 DSLAM and CPE products operating in Annex Q (35b) mode.

IOL

Certification

Status
Fully Documented (Active)
Revision
R10
Testing Days Needed
5 days
Last Modified
2014-02-04
Abstract
Testing of a DSL CPE device to meet the requirements of the Calix Compatible Program (https://portal.calix.com/portal/calix_compatible/). Test requirements include ADSL2+, VDSL2, single, and bonded-line performance, including Layer-2 traffic testing. For access to the formal test plan, please contact dslinterop@calix.com.
Notes
Test time is per combination of 1 CPE tested against 1 Calix DSLAM platform.

Interoperability

Status
Fully Documented (Active)
Revision
1.20
Testing Days Needed
2 days per DSLAM/CPE
Last Modified
2008-03-24
Abstract
This test suite describes testing procedures that demonstrate basic connectivity and stability of the DUT in a VDSL2 system. The individual test cases determine the net data rate at which the DUT initializes with a specific VTU-R or VTU-O on various North American test loops in the presence of injected crosstalk. This test suite is valid for both single pair VDSL2 systems. For most VTU-Os, this test is automated via LASI.
Status
Fully Documented (Active)
Revision
3.4.0
Testing Days Needed
1 day per DSLAM/CPE
Last Modified
2007-03-21
Abstract
This test suite describes testing procedures that demonstrate basic connectivity and stability of the DUT in an ADSL system. The individual test cases determine the net data rate at which the DUT initializes with a specific ATU-R or ATU-C on various North American and ETSI test loops in the presence of injected crosstalk. This test suite is valid for both single pair ADSL systems and multi-pair bonded ADSL systems.
Notes
A sample report for a multi-pair bonded ADSL system can be downloaded here . For most ATU-Cs, this test is automated via LASI.
Status
Fully Documented (Partially Implemented)
Revision
2.0.0
Testing Days Needed
1.5 days
Last Modified
2006-08-14
Abstract
This test suite verifies the on-line reconfiguration capabilities of a DSL system. Presently the test suite offers a means to verify ADSL2 seamless rate adaptation (SRA) through the generation and injection of a varying white noise floor. The test suite also offers a means to verify ADSL bit swapping (BS) through the injection of specific interfering tones. A means to test dynamic rate repartitioning (DRR) is currently being investigated.

Key

Fully Documented
Draft