IPv6 Services

The test suites on this page may be downloaded and used for internal purposes only. The test suites may not be commercialized in any way without express permission of the UNH-IOL.

Table of contents

Introduction     [Top]

The IPv6 Consortium currently offers the following Services. These documents are constantly being updated to improve readability and to reflect the current specifications. Please contact us if you would like more information or have questions about the IPv6 Consortium

Document Certification     [Top]

When testing based on the following test suites is performed, all reports generated will be digitally signed using an Adobe digital certificate. Upon reception of the report, the recipient can verify its authenticity using the instructions provided at http://www.iol.unh.edu/certifyDoc.

 

IOL     [Top]

Conformance     [Top]
IPv6 Ready Logo Phase 1 Base Specification Test Suite v4.0.2 [Top]
Last Modified: 7/1/2008
Revision: 4.0.2
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: Phase-I requirements are listed on pages 16-18. This is a converged test suite that covers multiple RFCs to test IPv6 implementations. This test suite can be used to apply for a IPv6 Ready Logo for the Base Specification Protocols. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 2460, RFC 4861, RFC 4862, RFC 4291, RFC 4443, RFC 5095 and RFC 1981.
 
IPv6 Ready Logo Phase 1 Base Specification Test Suite [Top]
Last Modified: 5/30/2008
Revision: 3.8.11
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: Phase-1 Test Requirements are listed on Pages 16-18. This test suite will be accepted by the Logo Committee until November 30th 2008. The following IETF documents are covered: RFC 2460, RFC 2461, RFC 2462, RFC 4443, and RFC 1981.
Test Suite: PDF Click to download PDF
Sample Report: PDF Click to download PDF
 
IPv6 Ready Logo Phase 2 Base Specification Test Suite v4.0.2 [Top]
Last Modified: 7/1/2008
Revision: 4.0.2
Status: Fully Documented (Active)
Testing Days Needed: 10 days
Abstract: This is a converged test suite that covers multiple RFCs to test IPv6 implementations. This test suite can be used to apply for a IPv6 Ready Logo Phase 2 for the Base Specification Protocols. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 2460, RFC 4861, RFC 4862, RFC 4443, RFC 5095 and RFC 1981.
Test Suite: PDF Click to download PDF
 
IPv6 Ready Logo Phase 2 Base Specification Test Suite [Top]
Last Modified: 5/30/2008
Revision: 3.8.11
Status: Fully Documented (Active)
Testing Days Needed: 10 days
Abstract: This test suite will be accepted by the Logo Committee until November 30th 2008. The following IETF documents are covered: RFC 2460, RFC 2461, RFC 2462, RFC 4443, and RFC 1981.
Test Suite: PDF Click to download PDF
Sample Report: PDF Click to download PDF
 
IPv6 Ready Logo IPSec Specification Test Suite [Top]
Last Modified: 1/10/2006
Revision: 1.8.0
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This is a converged test suite that covers multiple RFCs to test IPv6 implementations. This test suite can be used to apply for a IPv6 Ready Logo for the Base Specification Protocols. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 2404, RFC 2410, RFC 2451, RFC 3602, RFC 3566, RFC 3686, RFC 4301, RFC 4303, RFC 4305 and RFC 4443.
Test Suite: PDF Click to download PDF
 
IPv6 Ready Logo MLD Base Specification Test Suite [Top]
Last Modified: 2/17/2005
Revision: 1.4
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This test suite is experimental as the IPv6 Ready Logo Program does not currently include MLD. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 2710.
Test Suite: PDF Click to download PDF
 
IPv6 Ready DHCPv6 Specification Test Suite [Top]
Last Modified: 9/19/2007
Revision: 1.0.2
Status: Fully Documented (Active)
Testing Days Needed: 10 days
Abstract: This is a converged test suite that covers multiple RFCs to test IPv6 implementations. This test suite can be used to apply for a IPv6 Ready Logo for the DHCPv6 Specification Protocols. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 3315, RFC 3646, RFC 3763, RFC 2462, and RFC 4443.
Test Suite: PDF Click to download PDF
 
RIPng Operations Test Suite [Top]
Last Modified: 1/30/2004
Revision: 2.0
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This suite of tests is intended to help implementers evaluate the functionality of their products that support RIPng, the next generation routing information protocol. This suite is designed to test interoperability of the device under test with other RIPng capable devices. These tests cover RFCs 2080 and 2460.
Test Suite: PDF Click to download PDF
Sample Report: PDF Click to download PDF
 

Interoperability     [Top]
IPv6 Ready Logo Phase 1 Base Interoperability Test Suite v4.0.0 [Top]
Last Modified: 5/30/2008
Revision: 4.0.0
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: Phase-I requirements are listed on page 9. This is a converged test suite that covers multiple RFCs to test IPv6 implementations. This test suite can be used to apply for a IPv6 Ready Logo Phase 2 for the Base Specification Protocols. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 2460, RFC 4861, RFC 4862, RFC 4443, RFC 5095 and RFC 1981.
Test Suite: PDF Click to download PDF
 
IPv6 Ready Logo Phase 1 Base Interoperability Test Suite [Top]
Last Modified: 5/30/2008
Revision: 2.8.4
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This test suite will be accepted by the Logo Committee until November 30th 2008. The following IETF documents are covered: RFC 2460, RFC 2461, RFC 2462, RFC 4443, and RFC 1981.
Test Suite: PDF Click to download PDF
Sample Report: PDF Click to download PDF
 
IPv6 Ready Logo Phase 2 Base Interoperability Test Suite v4.0.0 [Top]
Last Modified: 5/30/2008
Revision: 4.0.0
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This is a converged test suite that covers multiple RFCs to test IPv6 implementations. This test suite can be used to apply for a IPv6 Ready Logo Phase 2 for the Base Specification Protocols. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 2460, RFC 4861, RFC 4862, RFC 4291, RFC 4443, RFC 5095 and RFC 1981.
Test Suite: PDF Click to download PDF
 
IPv6 Ready Logo Phase 2 Base Interoperability Test Suite [Top]
Last Modified: 5/30/2008
Revision: 2.8.4
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This test suite will be accepted by the Logo Committee until November 30th 2008. The following IETF documents are covered: RFC 2460, RFC 2461, RFC 2462, RFC 4443, and RFC 1981.
Test Suite: PDF Click to download PDF
Sample Report: PDF Click to download PDF
 
IPv6 Ready DHCPv6 Interoperability Test Suite [Top]
Last Modified: 4/26/2007
Revision: 1.0.2
Status: Fully Documented (Active)
Testing Days Needed: 10 days
Abstract: This is a converged test suite that covers multiple RFCs to test IPv6 implementations. This test suite can be used to apply for a IPv6 Ready Logo for the DHCPv6 Specification Protocols. This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6. The following IETF documents are covered: RFC 4443, RFC 3315, RFC 3646, and RFC 3736.
Test Suite: PDF Click to download PDF
 
IPv6 Ready Logo IPSec Interoperability Test Suite [Top]
Last Modified: 4/6/2006
Revision: 1.5.0
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This is a converged test suite that covers multiple RFCs to test IPv6 IPSec implementations. This test suite can be used to apply for a IPv6 Ready Logo for IPSec.This suite of tests is also intended to help implementers evaluate the functionality of their products that support IPv6 IPSec.The following IETF documents are covered: RFC 2404, RFC 2410, RFC 2451, RFC 3602, RFC 3566, RFC 3686, RFC 4301, RFC 4303, RFC 4305 and RFC 4443.
Test Suite: PDF Click to download PDF
 
OSPFv3 Interoperability Test Suite [Top]
Last Modified: 5/13/2004
Revision: 1.5
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This suite of tests is intended to help implementers evaluate the ability of their OSPFv3 capable products to operate in a multi-system environment. The tested cases are designed to test many aspects of the OSPFv3 protocol and also reflect real world network topologies.
Test Suite: PDF Click to download PDF
 
BGP4+ Interoperability Test Suite [Top]
Last Modified: 3/23/2005
Revision: 1.0
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This suite of tests is intended to help implementers evaluate the ability of their BGP4+ capable products to operate in a multi-system environment. The tested cases are designed to test many aspects of the BGP4+ protocol.
Test Suite: PDF Click to download PDF
 
RIPng Interoperability Test Suite [Top]
Last Modified: 3/12/2007
Revision: 2.0
Status: Fully Documented (Active)
Testing Days Needed: 5 days
Abstract: This suite of tests is intended to help implementers evaluate the functionality of their products that support RIPng, the next generation routing information protocol. This suite is designed to test interoperability of the device under test with other RIPng capable devices. These tests cover RFCs 2080 and 2460.
Test Suite: PDF Click to download PDF
Sample Report: PDF Click to download PDF
 
Office Network Interoperability [Top]
Last Modified: 7/17/2007
Revision: 1.3
Status: Fully Documented (Active)
Testing Days Needed: 5 Days
Abstract: The Office Network Testing is based on defined features and functionality determined at the time of the testing. The test cases verify the operation of the application equipment and network protocol interaction in the office environment. It is designed to test IPv6 applications in a native or Dual-Stacked multivendor environment.
Test Suite: PDF Click to download PDF
 
Protocol Independent Multicast - Sparse Mode Interoperability Test Suite [Top]
Last Modified: 8/28/2007
Revision: 1.1
Status: Fully Documented (Active)
Testing Days Needed: 5 Days
Abstract: This suite of tests is intended to help implementers evaluate the functionality of their products that support PIM-SM. This suite is designed to test interoperability of the device under test with other PIM-SM capable devices. These tests cover RFCs 4606 and 3810.
Test Suite: PDF Click to download PDF
 

 
IPv6
Related Technologies