Routing Services

The test suites on this page may be downloaded and used for internal purposes only. The test suites may not be commercialized in any way without express permission of the UNH-IOL.

Introduction     [Top]

Document Certification     [Top]

IOL     [Top]

Conformance     [Top]
Border Gateway Protocol 4 (BGP) Operations Test Suite [Top]
Revision:	3.7
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	The Border Gateway Protocol (BGP) is an inter-Autonomous System routing protocol. The primary function of a BGP speaking system is to exchange network reachability information with other BGP systems. This includes information on the list of Autonomous Systems (ASs) that reachability information traverses. From this, a graph of AS connectivity is constructed from which routing loops may be pruned and some policy decisions at the AS level may be enforced.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Open Shortest Path First (OSPF), Version 2 Operations Test Suite [Top]
Revision:	2.9
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	OSPF is a link-state routing protocol. It is designed to be run internal to a single Autonomous System. Each OSPF router maintains an identical database describing the Autonomous System's topology. From this database, a routing table is calculated by constructing a shortest-path tree.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Open Shortest Path First (OSPF) Not-So-Stubby Area (NSSA) Option Test Suite [Top]
Revision:	1.9
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	An OSPF NSSA is an optional type of OSPF area that has the capability of importing external routes into a designated OSPF area. The NSSA area has a new option bit (the N-bit) and a new type of LSA (Type-7). This is an optional test suite that can be tested as an extension to our OSPF Operations Test Suite.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Intermediate System to Intermediate System (IS-IS) Operations Test Suite [Top]
Revision:	4.6
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	IS-IS is a Link State Protocol. IS-IS systems form adjacencies with other systems in the same Area (Level-1), Domain (Level-2), or both to build Link State Databases where network and neighbor topology information is stored. Dijkstra Shortest Path First algorithm is then used to create a Forwarding Information Database containing routing information learned through IS-IS.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Routing Information Protocol, Version 2 (RIP) Operations Test Suite [Top]
Revision:	4.4
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	RIP is a routing protocol based on the Bellman-Ford (or distance vector) algorithm. This algorithm has been used for routing computations in computer networks since the early days of the ARPANET.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Routing Information Protocol next generation (RIPng) Operations Test Suite [Top]
Revision:	2.0
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	This suite of tests is intended to help implementers evaluate the functionality of their products that support RIPng, the next generation routing information protocol. This suite is designed to test interoperability of the device under test with other RIPng capable devices. These tests cover RFCs 2080 and 2460.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Protocol Independent Multicast - Sparse Mode (PIM - SM) Operations Test Suite [Top]
Revision:	2.4
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	PIM-SM is a multicast routing protocol that uses an underlying topology-gathering unicast protocol to populate a routing table with routes; it is independent of which protocol is actually used. In Sparse Mode, the number of routers with attached group members is small with respect to the total number of routers; group members are widely dispersed. PIM-SM is often deployed in Multicast WAN scenarios.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Internet Group Management Protocol (IGMP) Conformance Test Suite [Top]
Revision:	2.0
Status:	Fully Documented (Active)
Testing Days Needed:	5 Days
Abstract:	IGMP Version 3 (Internet Group Management Protocol) is used by hosts to report their interest in multicast groups to neighboring routers. Version 3 adds the ability to filter on sources which was not included in previous versions of IGMP. Source filtering allows the router to request only the needed sources.
Test Suite:	Click to download PDF
Transmission Control Protocol (TCP) Operations Test Suite [Top]
Revision:	1.0
Status:	Fully Documented (Active)
Testing Days Needed:	5 Days
Abstract:	TCP is a protocol that governs sending and receiving data. The protocol include flow control and reliability. All the responsibilities are controlled by the end points. Hosts are responsible for keeping track of round trip times (RTT). Flow control is determined by RTT and lost packets. The following IETF documents are tested in this suite: RFC 793, RFC 1122.
Test Suite:	Click to download PDF
Virtual Router Redundancy Protocol, Version 2 (VRRP) Operations Test Suite [Top]
Revision:	2.4
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	VRRP specifies an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN. The VRRP router controlling the IP address(es) associated with a virtual router is called the Master, and forwards packets sent to these IP addresses. The election process provides dynamic fail over in the forwarding responsibility should the Master become unavailable. This allows any of the virtual router IP addresses on the LAN to be used as the default first hop router by end-hosts.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Interoperability     [Top]
Border Gateway Protocol 4 (BGP) Multi-System Interoperability Test Suite [Top]
Revision:	1.0
Status:	Fully Documented (Active)
Testing Days Needed:	5 Days
Abstract:	This suite of tests has been developed to help implementers evaluate the functioning of their Border Gateway Protocol 4 (from now on referred to as BGP) products. This test suite has been designed to test interoperability of a device under test with other BGP based products. This test suite focuses on testing configurations of the network that could cause problems when deployed if the device under test does not operate properly with the devices that it is connected to. The tests do not determine if a product conforms to the BGP specification, but they are designed as interoperability tests. These tests provide one method to isolate problems within the BGP capable device that will affect the interoperability performance. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with other BGP capable devices. However, these tests do provide a reasonable level of confidence that the RUT will function well in most BGP environments.
Test Suite:	Click to download PDF
Open Shortest Path First (OSPF), Version 2 Multi-System Interoperability Test Suite [Top]
Revision:	1.6
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	This suite of tests has been developed to help implementers evaluate the functionality of their products that support OSPF. This test suite focuses on testing the Interoperability of the DUT with other OSPF devices. The tests do not determine if a product conforms to the specifications that define OSPF, but they are designed as interoperability tests. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with all other OSPF devices in any scenario. However, these tests provide a reasonable level of confidence that the DUT will function well in most OSPF environments.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Routing Information Protocol, Versions 1 and 2 Multi-System Interoperability Test Suite [Top]
Revision:	2.2
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	This suite of tests has been developed to help implementers evaluate the functionality of their products that support RIP. This test suite focuses on testing the Interoperability the DUT with other RIP devices. The tests do not determine if a product conforms to the specifications that define RIP, but they are designed as interoperability tests. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with all other RIP devices in any scenario. However, these tests provide a reasonable level of confidence that the DUT will function well in most RIP environments.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Routing Information Protocol next generation (RIPng) Interoperability Test Suite [Top]
Revision:	2.1
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	This suite of tests is intended to help implementers evaluate the functionality of their products that support RIPng, the next generation routing information protocol. This suite is designed to test interoperability of the device under test with other RIPng capable devices. These tests cover RFCs 2080 and 2460.
Test Suite:	Click to download PDF
Sample Report:	Click to download PDF
Protocol Independent Multicast-Sparse Mode (IPv4) Interoperability Test Suite [Top]
Revision:	1.5
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	This suite of tests has been developed to help implementers evaluate the functionality of their products that support PIM-SM. This test suite focuses on testing the Interoperability between the Device Under Test with other PIM-SM devices. The tests do not determine if a product conforms to the specifications that define PIM-SM, but they are designed as interoperability tests. Successful completion of all tests contained in this suite does not guarantee that the tested device will operate with all other PIM-SM devices in any scenario. However, these tests provide a reasonable level of confidence that the DUT will function well in most PIM-SM environments.
Test Suite:	Click to download PDF
Protocol Independent Multicast-Sparse Mode (IPv6) Interoperability Test Suite [Top]
Revision:	1.5
Status:	Fully Documented (Active)
Testing Days Needed:	5 Days
Abstract:	This suite of tests is intended to help implementers evaluate the functionality of their products that support PIM-SM. This suite is designed to test interoperability of the device under test with other PIM-SM capable devices. These tests cover RFCs 4606 and 3810.
Test Suite:	Click to download PDF
Internet Group Management Protocol Version 3 (IGMPv3) Multi-System Interoperability Test Suite [Top]
Revision:	1.0
Status:	Fully Documented (Active)
Testing Days Needed:	5 days
Abstract:	IGMP Version 3 (Internet Group Management Protocol) is used by hosts to report their interest in multicast groups to neighboring routers. Version 3 adds the ability to filter on sources which was not included in previous versions of IGMP. Source filtering allows the router to request only the needed sources. This test suite verifies that routers can manage querier election, accept basic reports and interoperate with other version group members. These tests cover the following RFC 1112, and 2236.
Test Suite:	Click to download PDF

USGv6 Test Program     [Top]