CPE Router (Home Router) Tested List



This list contains information about CPE Router Products that have performed the IPv6 Ready Logo CE Router Interoperability Test Scenario at the UNH-IOL. This list will be maintained until the official IPv6 Ready CPE Logo Launch (November 2012).

CPE Router Logo Information:

  • Requires 100% pass for both Conformance and Interoperability Test Specifications
  • Conformance Test Specification Status: Under Public Review
  • Interoperability Test Scenario Status: Released as above

Interoperability Only - 100% PASS Device List
Note: Vendors are recommended to complete the IPv6 Ready Logo (Conformance and Interoperability) when launched.
Company Product Product Version Test Scenario Version Date Listed
Cisco Systems Linksys E4200 v1 Firmware 1.0.04 1.0.0.b7 1/12/12
Broadcom BCM 93380 WVG 5.5.6 1.0.0.b6 11/9/11
D-Link DIR-Series Router v.1.00 1.0.0.b6 11/9/11
D-Link DIR-Series Router v2.00 1.0.0.b6 11/9/11
Lantiq Broadband Router/Gateway/XRX100/XRX200/XRX300 UGW-5.x series Router/Gateway 1.0.0.b6 11/9/11

Note: Successful completion of all tests contained in this specification does not guarantee that the tested device will operate with other compliant devices, however will provide a reasonable level of confidence that the router will function well as per the Basic Requirements for IPv6 Customer Edge Routers. The company listed above may be contacted for the test report and detailed topology information.

White Papers
IPv6 CE Router Interoperability Whitepaper - November 2011
UNH-IOL CE Router Whitepaper - February 2011
IPv6
Related Technologies